Engine Starting System & Charging System (2.5L): Generator: Disassembly

1. Remove the cover.

   Courtesy of SUBARU OF AMERICA, INC.

2. Remove the terminal B.

   Courtesy of SUBARU OF AMERICA, INC.

3. Remove the rear cover.

   Courtesy of SUBARU OF AMERICA, INC.

4. Remove the brush holder.
   NOTE: Set a correctly sized socket (a) to the brush holder, and remove by sliding the brush holder to the socket (a) so that the brush does not project out.

   Courtesy of SUBARU OF AMERICA, INC.

5. Remove the IC regulator.

Courtesy of SUBARU OF AMERICA, INC.