Rear ABS Wheel Speed Sensor: Removal
- Disconnect the ground terminal from 12V engine restart battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY
.NOTE: For the hybrid model, disconnect the battery negative terminal.
- Lift up the vehicle, and then remove the rear wheels.
- Remove the rear ABS wheel speed sensor.
CAUTION:
- Be careful not to damage the sensor.
- Do not apply excessive force to the sensor harness.
- Leave the sensor harness clamp on the vehicle side.
- Disconnect the connector from the rear ABS wheel speed sensor.
- Remove the harness clamp and bolts, and remove the rear ABS wheel speed sensor from the rear axle housing.
- Impreza model
- Crosstrek model