LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Forester Base >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamics Control (VDC) System >> Relay And Fuse >> Inspection >> Check Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Check Relay

  1. Measure the resistance between relay terminals.
    Terminal No. Inspection conditions Standard Circuit
    10 - 9 Always 1 MΩ or more
    G13591678Courtesy of SUBARU OF AMERICA, INC.
    10 - 7 Always Less than 1 Ω
    10 - 9 Apply battery voltage between terminals 6 and 8. Less than 1 Ω
  2. Replace the relay if the inspection result is not within the standard value.
scientia non olet · About LEMON Manuals