April 5, 2026: LEMON Manuals is launched! Read the announcement.

VDC Sequence Control With Subaru Select Monitor

NOTE: In the event of any trouble, sequence control will not operate.

Connect the Subaru Select Monitor.
1. Turn the ignition switch to ON.
2. On [Start] screen, select [Diagnosis].
3. On [Select Vehicle] screen, input the target vehicle information and select [OK].
4. On [Main Menu] screen, select [Each System].
5. On [Select System] screen, select [Brake Control], and then select [Enter].
6. On [Select Function] screen, select [Work Support].
7. On the work support item list, select [VDC Check Mode].
Operate according to the procedures displayed in the Subaru Select Monitor.
The brake system being operated is displayed on the Subaru Select Monitor.