LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Legacy Premium >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Stabilizer >> Installation >> Stabilizer Bushing
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Stabilizer Bushing

  1. Before installation, inspect the following items and replace any faulty part with a new one. Check the rubber bushing stabilizer front for abnormal cracks, fatigue or damage.
  2. Install the rubber bushing stabilizer front.
  3. Install the clamp stabilizer.

    Tightening torque: 

    25 N.m (2.5 kgf-m, 18.4 ft-lb)

  4. Install the front exhaust pipe. (H4DO model) Refer to Exhaust (H4DO)>Front Exhaust Pipe>Installation .
  5. Install the center exhaust pipe (rear). (H4DOTC model) Refer to Exhaust (H4DOTC)>Center Exhaust Pipe>Installation>Center Exhaust Pipe (Rear) .
  6. Install the under cover front. Refer to Exterior/Interior Trim>Front Under Cover>Installation .
scientia non olet · About LEMON Manuals