LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2020 >> Outback Base >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Fuel Injection System (2.4L)) >> Fuel Level Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Level Sensor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install the fuel level sensor to the fuel pump assembly.
    CAUTION: Be sure to install the fuel level sensor harness to the clip first, then install the connector cable. Otherwise, malfunction may occur.
    G13619760Courtesy of SUBARU OF AMERICA, INC.
  2. Install the fuel pump assembly. Refer to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Fuel Pump Assembly>INSTALLATION .
scientia non olet · About LEMON Manuals