Main Switch
- Measure the resistance between terminals of the switch assembly power window main.
Preparation tool:
Circuit tester
- Driver's seat main
Terminal No. Inspection conditions Standard 11 - 12 OFF Less than 1 Ω 7-11
7 - 121 MΩ or more 7-12 Manual UP Less than 1 Ω 7-11
11 - 121 MΩ or more 7-11 Manual DOWN Less than 1 Ω 7-12
11 - 121 MΩ or more - Rear seat remote right (window lock OFF)
Terminal No. Inspection conditions Standard 1 - 7
2 - 7OFF Less than 1 Ω 7-16 1 MΩ or more 1 - 16
2 - 7Manual UP Less than 1 Ω 1 - 2 1 MΩ or more 2-16
1 -7Manual DOWN Less than 1 Ω 1 - 2 1 MΩ or more - Rear seat remote left (window lock OFF)
Terminal No. Inspection conditions Standard 9-7
8 -7OFF Less than 1 Ω 16-7 1 MΩ or more 16-9
8 -7Manual UP Less than 1 Ω 8-9 1 MΩ or more 16-8
9 -7Manual DOWN Less than 1 Ω 8-9 1 MΩ or more - Rear seat remote right (window lock ON)
Terminal No. Inspection conditions Standard 1 - 2 OFF Less than 1 Ω 7-16 1 MΩ or more 1 - 16 Manual UP Less than 1 Ω 1- 2
27-1MΩ or more 2-16 Manual DOWN Less than 1 Ω 1 - 2
171 MΩ or more - Rear seat remote left (window lock ON)
Terminal No. Inspection conditions Standard 9 - 8 OFF Less than 1 Ω 16 - 7 1 MΩ or more 16 - 9 Manual UP Less than 1 Ω 8 - 7
9 - 81 MΩ or more 16 - 8 Manual DOWN Less than 1 Ω 9 - 8
9 - 71 MΩ or more - If the inspection result is not within the standard value, replace the switch assembly power window main.