LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Ascent Premium >> Repair and Diagnosis >> Transmission >> Automatic Trans >> CVT Transaxle System >> Transmission Mounting System >> Installation >> Pitching Stopper
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Pitching Stopper

  1. Install the pitching stopper bracket.
    NOTE: Tighten the bolt side while holding the nut side.

    Tightening torque: 

    41 N.m (4.2 kgf-m, 30.2 ft-lb)

    G13621925Courtesy of SUBARU OF AMERICA, INC.
  2. Install the pitching stopper.
    NOTE: Install with the front mark (a) facing towards the front of the vehicle.

    Tightening torque: 

    T1: 50 N.m (5.1 kgf-m, 36.9 ft-lb)

    T2: 58 N.m (5.9 kgf-m, 42.8 ft-lb)

    Fig 1: Pitching Stopper Bolt And Nut Components (With Torque Specification)
    G13621930Courtesy of SUBARU OF AMERICA, INC.
  3. Install the pitching stopper plate.

    Tightening torque: 

    18 N.m (1.8 kgf-m, 13.3 ft-lb)

  4. Connect the ground cord.
    1. Connect the coupling connector.
    2. Install the clips.
  5. Connect the air breather hose to the clip.
  6. Install the intercooler. Ref. to INTAKE (INDUCTION) (H4DOTC)>Intercooler>INSTALLATION .
scientia non olet · About LEMON Manuals