October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Select Lever: Removal
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
.
- Release the shift lock using a screwdriver, etc. and shift the select lever to the "N range".
 Courtesy of SUBARU OF AMERICA, INC.
|
- Lower the grip cover vertically.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the clamp.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the grip.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the rod.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the cover assembly front and the console box assembly. Ref. to EXTERIOR/INTERIOR TRIM>Console Box>REMOVAL
.
- Remove the cover center side RH and the cover center side LH. Ref. to EXTERIOR/INTERIOR TRIM>Center Console>REMOVAL
.
- Remove the select cable. Ref. to CONTROL SYSTEMS>Select Cable>REMOVAL .
- Disconnect the connector.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the select lever.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the harness clip.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the indicator.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the connector.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the harness.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the housing, blind A and blind B.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Pull out the terminal of the solenoid unit using KTC connector terminal tool (part number: ECC-1T).
NOTE:
A flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less can also be used.
 Courtesy of SUBARU OF AMERICA, INC.
|
| Terminal No. |
Wiring color |
| 5 |
Red/white |
| 6 |
Blue/white |