October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Keyless Access Control Module: Removal
- Disconnect the ground terminal from battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION
.
- Release the lock, tilt the steering column to the lowest end and fully extend the column by the telescopic system.
- Remove the grille ventilation assembly center LH. Ref. to AIR CONDITIONER>AIR VENT GRILLE>REMOVAL>CENTER GRILLE
.
- Remove the combination meter assembly. Ref. to INSTRUMENTATION/DRIVER INFO>COMBINATION METER>REMOVAL
.
- Remove the screw and remove the reinforcement meter.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the keyless access control module.
CAUTION:
Be careful to keep water and other foreign materials away from the keyless access control module terminals.
- Disconnect the connector.
- Remove the bolts and remove the keyless access control module.
 Courtesy of SUBARU OF AMERICA, INC.
|