October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Auto Start Stop OFF Switch: Inspection
- Check that there is no deformation, cracks or other damages.
- Check the resistance between terminals shown in the following table.
 Courtesy of SUBARU OF AMERICA, INC.
|
| Terminal No. |
Inspection conditions |
Standard |
| 6 - 8 |
Switch ON |
Less than 1 Ω |
| Switch OFF |
1 MΩ or more |
- Apply battery voltage between the terminals shown in the table below to check lighting condition of illumination inside the switch.
CAUTION:
When applying battery voltage, do not mix up the positive (+) side and the negative (-) side.
Incorrect polarity connection may cause LED damage inside the switch.
Courtesy of SUBARU OF AMERICA, INC.
|
| Terminal No. |
Inspection conditions |
Condition |
| 1 (+) - 4 (-) |
Apply battery voltage. |
Light ON |