October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Engine Control Module (ECM): Removal
- Disconnect the ground terminal from battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION
.
- Disconnect the connector in numerical order as shown in the figure.
CAUTION:
Make sure that the lock is released before moving the lever in order to avoid damaging the connector.
NOTE:
To disconnect the connector, press the portion (a) shown in the figure to release the lock and move the lever in the direction of arrow.
 Courtesy of SUBARU OF AMERICA, INC.
|
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the ECM from vehicle.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the ECM bracket.