October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Inlet Engine Coolant Temperature Sensor
- Disconnect the ground terminal from battery sensor, Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION
.
- Drain engine coolant. Ref. to COOLING (H4DO)>ENGINE COOLANT>REPLACEMENT>DRAINING OF ENGINE COOLANT
.
- Remove the front exhaust pipe. Ref. to EXHAUST (H4DO)>FRONT EXHAUST PIPE>REMOVAL
.
- Disconnect the connector (A) and disconnect the connector (B) from the chain cover.
- Remove the bolt (C) securing the harness stay, and remove the inlet engine coolant temperature sensor.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the inlet engine coolant temperature sensor from the harness stay.
CAUTION:
Do not remove the inlet engine coolant temperature sensor harness from the harness stay unless replacing the inlet engine coolant temperature sensor.