LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Forester Premium >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Injection System >> Oil Control Solenoid >> Installation >> Exhaust Side
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Exhaust Side

  1. Install the backup ring to the oil control solenoid.
  2. Using a new O-ring, install the oil control solenoid.
    NOTE: Apply engine oil to O-ring.

    Tightening torque: 

    6.4 N.m (0.7 kgf.m, 4.7 ft.b)

  3. Connect the connector.
  4. Install the air intake duct (rear). Ref. to INTAKE (INDUCTION) (H4DO)>AIR INTAKE DUCT>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
  1. Install the backup ring to the oil control solenoid.
  2. Using a new O-ring, install the oil control solenoid.
    NOTE: Apply engine oil to O-ring.

    Tightening torque: 

    6.4 N.m (0.7 kgf.m, 4.7 ft.lb)

  3. Connect the connector.
  4. Connect the ground terminal to battery sensor. Ref. to GROUND TERMINAL REMOVAL OR INSTALLATION .
scientia non olet · About LEMON Manuals