April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P1451: EVAP System Clog Detected (Pipe): Notes

1. -

DTC detecting condition:

Detected when two consecutive driving cycles with fault occur.

NOTE: After the faulty parts are repaired or replaced, perform the final check in Basic Diagnostic Procedure. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE .

CHECK DRAIN TUBE BETWEEN CANISTER AND LEAK CHECK VALVE ASSEMBLY .
Check the drain tube between the canister and leak check valve assembly.

Is the drain tube between canister and leak check valve assembly clogged?

Yes : Replace the drain tube between the canister and leak check valve assembly. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO)>CANISTER .

No : Go to 2 .
CHECK HOSE AND TUBE BETWEEN CANISTER AND FUEL TANK .
Check the hose and tube between the canister and fuel tank.

Are the hose and tube between the canister and fuel tank clogged?

Yes : Replace the hose or tube between the canister and fuel tank. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO)>CANISTER . Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>FUEL TANK .

No : Replace the canister. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO)>CANISTER .

After the Operation is complete, go to the next step. Go to 3 .
CHECK EVAPORATIVE EMISSION CONTROL SYSTEM .
1. Perform the corresponding inspection mode.
  Ref. to ENGINE (DIAGNOSTICS) (H4DO)>INSPECTION MODE .
2. Using the Subaru Select Monitor or a general scan tool, read the DTC of [Engine].
  Ref. to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .
  
  Is DTC P1451 displayed? (Current malfunction)
  
  Yes : Replace the leak check valve assembly. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DO)>LEAK CHECK VALVE ASSEMBLY .
  
  No : End.