DTC P0222: Throttle/Pedal Position Sensor/Switch "B" Circuit Low: Notes
1. -
DTC detecting condition:
Immediately at fault recognition
Trouble symptom:
- Improper idling
- Poor driving performance
- Engine stall
Wiring diagram:
Engine Electrical System Ref. to WIRING SYSTEM>ENGINE ELECTRICAL SYSTEM .
- CHECK HARNESS BETWEEN ECM AND ELECTRONIC THROTTLE CONTROL CONNECTOR (SHORT TO GROUND)
.
- Turn the ignition switch to OFF.
- Disconnect the connector from ECM.
- Disconnect the connectors from electronic throttle control.
- Measure the resistance between the ECM connector and engine ground.
Connector and terminal
(E53) No. 27 - Engine ground:
(E53) No. 43 - Engine ground:
(E53) No. 43 - (E53) No. 44:
Is the resistance 1 MΩ or more?
Yes : Go to 2 .
No : Repair the ground short circuit of harness between ECM connector and electronic throttle control connector.
- CHECK SHORT CIRCUIT INSIDE THE ECM
.
- Connect the connector to ECM.
- Measure the resistance between electronic throttle control connector and engine ground.
Connector and terminal
(E116) No. 4 - Engine ground:
Is the resistance 1 MΩ or more?
Yes : Replace the electronic throttle control. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>THROTTLE BODY .
No : Repair the ground short circuit of harness between ECM connector and electronic throttle control connector. Replace the ECM if defective. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>ENGINE CONTROL MODULE (ECM) .