DTC P05C0: Active Grille Air Shutter Module "A" Over Temperature: Notes
1. -
DTC detecting condition:
Immediately at fault recognition
NOTE:
After the faulty parts are repaired or replaced, perform the final check in Basic Diagnostic Procedure. Ref. to ENGINE (DIAGNOSTICS) (H4DO)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE
.
- CHECK DTC
.
- Turn the ignition switch to OFF, and cool down the engine enough.NOTE: Cool down the engine unit until it can be easily touched by hand.
- Turn the ignition switch to ON.
- Using the Subaru Select Monitor or a general scan tool, read the DTC of [Engine]. Ref. to COMMON (DIAG)>DIAGNOSTIC TROUBLE CODE (DTC) .
Is DTC P05C0 displayed? (Current malfunction)
Yes : Replace the active grille shutter. Ref. to COOLING (H4DO)>ACTIVE GRILLE SHUTTER .
No : Even if DTC is detected, the circuit has returned to a normal condition at this time.
NOTE: In this case, there may have been a temporary rise of the temperature in the engine compartment. - Turn the ignition switch to OFF, and cool down the engine enough.