Auto Start Stop Dc/Dc Converter 1
WARNING: This page is about a different variant/trim than selected.
- Install the Auto Start Stop DC/DC converter 1 to the bracket.
Tightening torque: :
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Install the Auto Start Stop DC/DC converter 1 to the vehicle.
Tightening torque: :
7.5 N.m (0.8 kgf-m, 5.5 ft-lb)
- Connect the connector.
- Install the camera control assembly. (Model with front camera) Ref. to CAMERA CONTROL MODULE .
- Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .