LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2021 >> Outback Limited >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System - Seats >> Seat Heater System >> Installation >> Rear Seat Heater Control Module >> Outback Model
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Outback Model

CAUTION:
  • Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  • Side impact sensor (under the rear center seat) for the airbag system is located under the front center of the rear seat cushion. Be careful not to apply strong impact to the sensor when working with the rear seat cushion removed.
  1. Install the rear seat heater control module.

    Tightening torque: 

    13 N.m (1.3 kgf-m, 9.6 ft-lb)

  2. Install the trim panel assembly apron RH. Ref. to OUTBACK MODEL .
  3. Install the pad rear side RH. Ref. to SEATS>REAR SEAT>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals