Main Switch

CAUTION:

After installing the switch - power window main, always perform the initial setting.
Failure to do so may cause the improper activation of auto-reverse operation for pinching hazard prevention.
Use protective paper to avoid damage to the trim panel.

Install the panel - power window main switch to the trim panel - front door.
Install the trim panel - front door. Refer to EXTERIOR/INTERIOR TRIM>DOOR TRIM>INSTALLATION .
Connect the battery ground terminal. Refer to NOTE>NOTE>BATTERY .
Perform initial setting operation (reset operation A). Refer to GLASS/WINDOW/MIRRORS>POWER WINDOW SYSTEM>OPERATION>RESET OPERATION A .