When Front CROSSMEMBER Has Been Removed

Install the oil level switch and the clip (A) to the oil pan upper.
NOTE:
- Use new O-rings.
- Apply a coat of engine oil to the O-rings.
Tightening torque:

6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

Courtesy of SUBARU OF AMERICA, INC.
Connect the connector of oil level switch to the engine wiring harness, and install the clip (A) securing the harness.

Courtesy of SUBARU OF AMERICA, INC.
Install the front crossmember. Refer to FRONT SUSPENSION>FRONT CROSSMEMBER>INSTALLATION .