October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
MT Gear Shift Cable: Removal
- Disconnect the ground cable from battery. Refer to NOTE>NOTE>BATTERY
.
NOTE:
For model with battery sensor, disconnect the ground terminal from battery sensor.
- Lift up the vehicle.
- Remove the center exhaust pipe (rear). Refer to EXHAUST(W/O STI)>CENTER EXHAUST PIPE>REMOVAL
.
- Remove the center exhaust cover.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the cable clamp.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the dust cover.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the snap pin and washer.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the bolts holding the shift bracket.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the shift bracket together with the MT gear shift cable.
CAUTION:
Do not apply extra overload while holding the part (a).
 Courtesy of SUBARU OF AMERICA, INC.
|
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the cable cover plate.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Disconnect the MT gear shift cable.
CAUTION:
- Be careful not to deform the cable inner.
- Do not apply extra overload while holding the part (a).
 Courtesy of SUBARU OF AMERICA, INC.
|
NOTE:
Pull out down the MT gear shift cable to spread the spring.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the clamp.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Pull out the MT gear shift cable.
CAUTION:
- Do not bend MT gear shift cable at a sharp angle.
- Do not twist the cable inner excessively.
 Courtesy of SUBARU OF AMERICA, INC.
|