DTC P1C00: Battery Monitor Module "A" Performance: Notes
DTC detecting condition:
Immediately at fault recognition
CAUTION:
After servicing or replacing faulty parts, perform Clear Memory Mode. Refer to ENGINE (DIAGNOSTICS) (W/O STI)>CLEAR MEMORY MODE>OPERATION
. and Inspection Mode. Refer to ENGINE (DIAGNOSTICS) (W/O STI)>INSPECTION MODE>PROCEDURE
.
- CHECK DTC.
Read DTC using the Subaru Select Monitor or a general scan tool.. Refer to ENGINE (DIAGNOSTICS) (W/O STI)>READ DIAGNOSTIC TROUBLE CODE (DTC) .
Is DTC P1C00 displayed? (Current malfunction)
Yes: Replace the battery sensor.. Refer to STARTING/CHARGING SYSTEMS (W/O STI)>BATTERY SENSOR .
No: Even if DTC is detected, it has returned to a normal condition at this time. Reproduce the failure, and then perform the diagnosis again.