DTC P2004: TGV Control Stuck Open Bank 1: Notes

1. - DTC detecting condition:

Immediately at fault recognition

NOTE:

After the faulty parts are repaired or replaced, perform the final check in Basic Diagnostic Procedure. Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>Basic Diagnostic Procedure> PROCEDURE .

CHECK DTC .
1. Turn the ignition switch to ON.
2. Using the Subaru Select Monitor or a general scan tool, read the DTC of [Engine]. Ref. to COMMON (diag)>DIAGNOSTIC TROUBLE CODE (DTC) .
  Is DTC other than P2004 displayed? (Current malfunction)
  
  Yes : Check the appropriate DTC using the "Diagnostic Trouble Code (DTC)". Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>Diagnostic Trouble Code (DTC)>LIST .
  
  No : Go to 2.
CHECK TUMBLE GENERATOR VALVE RH .
1. Remove the intake manifold assembly. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>Intake Manifold Assembly>REMOVAL .
2. Check the tumble generator valve.
  Is there any dirt or clogging with foreign objects in the tumble generator valve?
  
  Yes : Clean the tumble generator valve.
  
  No : Replace the tumble generator valve RH. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>TUMBLE GENERATOR VALVE .
  
  NOTE:
  The tumble generator valve cannot be disassembled.