Fuel Pump Assembly: Inspection
NOTE:
Refer to "Fuel Level Sensor" for the fuel level sensor inspection procedure. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>FUEL LEVEL SENSOR>INSPECTION>FUEL PUMP SIDE .
- Check that the fuel pump has no deformation, cracks or other damages.
- Connect the battery positive terminal to terminal No. 5 and the battery negative terminal to terminal No. 6, and inspect the fuel pump operation.WARNING:
- Wipe off fuel completely.
- Keep the battery as far apart from fuel pump as possible.
- Do not run the fuel pump for a long time under non-load condition.