April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0500: Vehicle Speed Sensor "A" Circuit: Notes

1. -

DTC detecting condition:

Immediately at fault recognition

NOTE:

After the faulty parts are repaired or replaced, perform the final check in Basic Diagnostic Procedure. Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE

CHECK DTC OF Brake Control .
1. Turn the ignition switch to ON.
2. Using the Subaru Select Monitor or a general scan tool, read the DTC of [Brake Control]. Ref. to COMMON (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)
Is DTC for [Brake Control] displayed? (Current code)

Yes : Check the appropriate DTC using the "Diagnostic Trouble Code (DTC)". Ref. to BRAKE CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST

No : Repair the poor contact of ECM connector.