April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P1451: EVAP System Clog Detected (Pipe): Notes

1. -

DTC detecting condition:

Detected when two consecutive driving cycles with fault occur.

NOTE:

After the faulty parts are repaired or replaced, perform the final check in Basic Diagnostic Procedure. Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>BASIC DIAGNOSTIC PROCEDURE>PROCEDURE

CHECK DRAIN TUBE BETWEEN CANISTER AND LEAK CHECK VALVE ASSEMBLY .
Check the drain tube between the canister and leak check valve assembly.

Is the drain tube between canister and leak check valve assembly clogged?

Yes : Replace the drain tube between the canister and leak check valve assembly.

Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DOTC)>CANISTER

Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DOTC)>LEAK CHECK VALVE ASSEMBLY

No : Go to 2.
CHECK HOSE AND TUBE BETWEEN CANISTER AND FUEL TANK .
Check the hose and tube between the canister and fuel tank.

Are the hose and tube between the canister and fuel tank clogged?

Yes : Replace the hose or tube between the canister and fuel tank.

Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DOTC)>CANISTER

Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DOTC)>FUEL TANK

No : Replace the canister. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DOTC)>CANISTER

Go to 3.
CHECK EVAPORATIVE EMISSION CONTROL SYSTEM .
1. Perform the corresponding inspection mode. Ref. to ENGINE (DIAGNOSTICS) (H4DOTC)>INSPECTION MODE
2. Using the Subaru Select Monitor or a general scan tool, read the DTC of [Engine]. Ref. to COMMON (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)
Is DTC P1451 displayed? (Current code)

Yes : Replace the leak check valve assembly. Ref. to EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES) (H4DOTC)>LEAK CHECK VALVE ASSEMBLY

No : End.