Stopping Keyless Access System Function By Door Open/Close Procedure
- Check that the vehicle status is as follows:
- Ignition switch OFF
- One window is completely open
- Keyless access system is activated (or disabled if re-activating)
- Sit in the driver's seat with the door closed and press the door lock switch to UNLOCK once.
- Open the driver's door within five seconds.
- Within 5 seconds, with the driver's door opened, slowly press the door lock switch to UNLOCK twice.
- Within 10 seconds after finishing step 4, perform the closing → opening operation of the driver's door twice.
- Within 10 seconds after finishing step 5, with the driver's door opened, slowly press the door lock switch to UNLOCK twice.
- Within 10 seconds after finishing step 6, perform the closing → opening operation of the driver's door once.
- Within five seconds after finishing step 7, close the driver's door.
NOTE:
- Perform the same procedures to re-activate the keyless access system from the disabled condition.
- In step 4. and step 6, press the door lock switch completely. The function may not work properly if the switch is pressed shortly.