Inspection Mode F
| DTC | Item | Condition |
|---|---|---|
| P0708 | TRANSMISSION RANGE SENSOR "A" CIRCUIT HIGH | - |
| P2758 | TORQUE CONVERTER CLUTCH PRESSURE CONTROL SOLENOID CONTROL CIRCUIT STUCK ON | - |
Diagnostic procedure:
- Check the readiness code using Subaru Select Monitor and confirm that the diagnosis is not completed.
- Start the engine.
- Depress the brake pedal and move the select lever to each range at an interval of 5 seconds.NOTE: Move the select lever in the following order: "P" → "R" → "N" → "D".
- Drive for three seconds at 16 km/h (10 MPH).NOTE: Drive in "D" range and "R" range.