| ABS Sequence Control Mode |
Operate the valve and pump motor continuously to perform the ABS sequence control. |
Ref. to VEHICLE STABILITY CONTROL>ABS SEQUENCE CONTROL
. |
| VDC Check Mode |
Operate the valve and pump motor continuously to perform the VSC (VDC) sequence control. |
Ref. to VEHICLE STABILITY CONTROL>VSC (VDC) SEQUENCE CONTROL
. |
| Brake Lamp Lighting Operation |
Forcibly activate the brake light relay to illuminate the brake light. |
Ref. to VEHICLE STABILITY CONTROL>BRAKE LAMP RELAY>OPERATION>BRAKE LIGHT LIGHTING OPERATION BY SUBARU SELECT MONITOR
. |
| VSC (VDC) Centering Mode |
Set the steering angle sensor neutral position, and the lateral G sensor and longitudinal G sensor 0 (zero) point. |
Ref. to VEHICLE STABILITY CONTROL>VSC (VDC) CONTROL MODULE AND HYDRAULIC CONTROL UNIT (VSCCM & H/U)>ADJUSTMENT>VSC (VDC) SENSOR MIDPOINT SETTING MODE
. |