LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2023 >> Crosstrek Base, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System (Except For HEV) >> Oil Control Solenoid >> Installation >> Intake Side
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Intake Side

  1. Install the backup ring to the oil control solenoid.
  2. Using a new O-ring, install the oil control solenoid to the chain cover.
    NOTE: Apply engine oil to O-ring.

    Tightening torque:  6.4 N.m (0.7 kgf-m, 4.7 ft-lb)

  3. Connect the connector to the oil control solenoid.
  4. Install the air intake duct. (RH side only) Ref. to INTAKE (INDUCTION) (H4DO (EXCEPT FOR HEV))>AIR INTAKE DUCT>INSTALLATION .
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals