Front Strut: Disposal
CAUTION:
- Before handling the strut damper and shock absorber, be sure to wear goggles to protect eyes from gas, oil and cutting powder.
- Do not disassemble the strut damper and shock absorber or place them into a fire.
- When discarding the strut damper and the shock absorber filled with gas, use a saw to make a cut on them to purge the gas.
- Place the strut damper and shock absorber on a level surface with the piston rod fully expanded.
- Use a saw and make a cut at the location shown in the figure to purge the gas.
| (a) | 40 mm (1.57 in) |