Front Suspension System And Wheel Alignment: Stabilizer: Installation: Notes

CAUTION:

• For parts which are not reusable, always use new parts.
• Always tighten the bushing stabilizer front in the state where the vehicle is at curb weight and the wheels are in full contact with the ground.
• Install the clamp stabilizer with the peak of triangle facing the front of the vehicle.
  • Except for WILDERNESS model

    Courtesy of SUBARU OF AMERICA, INC.

  • WILDERNESS model

Courtesy of SUBARU OF AMERICA, INC.

NOTE: The left and right clamp stabilizers of WILDERNESS model differ in shape.