October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Select Lever: Removal
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
.
- Release the shift lock using a screwdriver, etc. and shift the select lever to the "N range".
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the center exhaust cover. Ref. to EXHAUST (H4DO)>REAR EXHAUST PIPE>REMOVAL
.
- Disconnect the select cable from the transmission main body.
CAUTION:
Do not apply excessive load while holding the part (a).
 Courtesy of SUBARU OF AMERICA, INC.
|
 Courtesy of SUBARU OF AMERICA, INC.
|
- Lower the grip cover vertically. (Model with gate shifter)
 Courtesy of SUBARU OF AMERICA, INC.
|
- Lower the boot vertically. (Model with boot shifter)
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the clamp.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the grip.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the duct console center. Ref. to AIR CONDITIONER>AIR VENT DUCT>REMOVAL>CONSOLE DUCT>CENTER
.
- Remove the harness.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Disconnect the connector.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the select lever.
CAUTION:
Be careful not to apply a load to the select cable.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Remove the select cable. Ref. to CONTROL SYSTEMS>SELECT CABLE>REMOVAL .