When Removing The CROSSMEMBER COMPL Front

Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
Drain the engine oil. Ref. to LUBRICATION (H4DOTC)>ENGINE OIL>REPLACEMENT .
Remove the crossmember COMPL front. Ref. to FRONT SUSPENSION>CROSSMEMBER>REMOVAL .
Remove the engine mounting LH.

Courtesy of SUBA
Remove the clip holding the oil level switch harness and disconnect the connectors.

Courtesy of SUBA
Remove the clip securing the harness, and remove the oil level switch.

Courtesy of SUBA