Electrical Specification
NOTE:
- Terminal numbers in VDCCM & H/U connector (on the control module side) are shown in the figure.
- When the connector is removed from the VDCCM & H/U, the brake warning light (EBD warning light)/parking brake warning light, ABS warning light, VDC warning light & VDC indicator light and VDC OFF indicator light illuminate.
| Terminal No. | Contents | Measuring condition | Standard | ||||
|---|---|---|---|---|---|---|---|
| (B66) No. 1 ←→ Chassis ground | VDC pump motor power supply | Always | Battery voltage | ||||
| (B66) No. 2 | RH rear brake caliper (+)(1) | - | - | ||||
| (B66) No. 3 | RH rear brake caliper (-)(1) | - | - | ||||
| (B66) No. 5 | Power unit 1 CAN H signal | - | - | ||||
| (B66) No. 7 | FL wheel speed sensor GND | - | - | ||||
| (B66) No. 8 ←→ Chassis ground | Electronic parking brake indicator light(1) | Always | Battery voltage | ||||
| (B66) No. 11 | (G)_Chassis CAN H signal | - | - | ||||
| (B66) No. 12 | LH rear brake caliper (-)(1) | - | - | ||||
| (B66) No. 13 | LH rear brake caliper (+)(1) | - | - | ||||
| (B66) No. 14 | Ground | - | - | ||||
| (B66) No. 15 | Electronic parking brake switch(1) | - | - | ||||
| (B66) No. 16 | Electronic parking brake switch(1) | - | - | ||||
| (B66) No. 19 | Power unit 1 CAN L signal | - | - | ||||
| (B66) No. 20 ←→ Chassis ground | Brake booster pressure sensor power supply(2) | Ignition switch: ON | 4.85 - 5.15 V | ||||
| (B66) No. 21 | FR wheel speed sensor signal | - | - | ||||
| (B66) No. 22 | RR wheel speed sensor signal | - | - | ||||
| (B66) No. 23 | RL wheel speed sensor GND | - | - | ||||
| (B66) No. 24 | FL wheel speed sensor signal | - | - | ||||
| (B66) No. 25 | (G)_Chassis CAN L signal | - | - | ||||
| (B66) No. 26 | FR wheel speed sensor GND | - | - | ||||
| (B66) No. 27 ←→ Chassis ground | Brake fluid level switch | Ignition switch: ON | 6 V or more | ||||
| (B66) No. 28 | Brake booster pressure sensor GND(2) | - | - | ||||
| (B66) No. 30 ←→ Chassis ground | VDCCM power supply | Always | Battery voltage | ||||
| (B66) No. 31 | Electronic parking brake switch(1) | - | - | ||||
| (B66) No. 32 | Electronic parking brake switch(1) | - | - | ||||
| (B66) No. 33 ←→ Chassis ground | Stop light switch output | Ignition switch: ON | Ignition power supply voltage | ||||
| (B66) No. 34 | VSO PIN output | - | - | ||||
| (B66) No. 35 | VSO PIN output | - | - | ||||
| (B66) No. 36 ←→ Chassis ground | Ignition power supply | Ignition switch: ON | Ignition power supply voltage | ||||
| (B66) No. 37 | RR wheel speed sensor GND | - | - | ||||
| (B66) No. 38 ←→ Chassis ground | Stop light switch | Brake pedal operation | Brake ON: Battery voltage Brake OFF: Ground |
||||
| (B66) No. 39 | RL wheel speed sensor signal | - | - | ||||
| (B66) No. 41 ←→ Chassis ground | VDC OFF switch | VDC OFF switch operation | Switch ON: 1 Ω or less Switch OFF: 1 MΩ or more |
||||
| (B66) No. 45 | Brake booster pressure sensor signal(2) | - | - | ||||
| (B66) No. 46 | Ground | - | - | ||||
|
|||||||