LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2023 >> WRX Base, Standard Trans >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Radiator Fan Control Unit >> Installation >> Radiator Fan Control Module (Main)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Radiator Fan Control Module (Main)

  1. Install the radiator fan control module (main).

    Tightening torque: 

    3.4 N.m (0.3 kgf-m, 2.5 ft-lb)

  2. Connect the connector to radiator fan control module (main).
    G14601462Courtesy of SUBARU OF AMERICA, INC.
  3. Install the reservoir tank. Ref. to COOLING (H4DOTC)>RESERVOIR TANK>INSTALLATION .
  4. Install the V-belt cover.
    NOTE:
    • Check the grommet for peel-off or disengagement.
    • Be careful not to deform the bracket during installation.

    Tightening torque: 

    7 N.m (0.7 kgf-m, 5.2 ft-lb)

    G14600900Courtesy of SUBARU OF AMERICA, INC.
  5. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals