Common Specifications & Procedures
WRX COMMON SPECIFICATIONS & PROCEDURES
| System | Specification/Procedure | ||
|---|---|---|---|
| Air Conditioning | |||
| Service | SPECIFICATION | ||
| Torque | See Torque Specifications in Text and applicable graphics under COMPONENTS WITH TORQUE SPECIFICATIONS | ||
| Axle Shaft Nut (Front) | 162.3 Ft. lb. (220 N.m) | ||
| Axle Shaft Nut (Rear) | 140.1 Ft. lb. (190 N.m) | ||
| Hub Bolts (Front & Rear) | Front: 70.1 Ft. lb. (95 N.m) / Rear: 62.7 Ft. lb. (85 N.m) | ||
| Battery | BATTERY | ||
| Brakes | |||
| Bleeding | AIR BLEEDING | ||
| Disc Brakes | |||
| Front | FRONT DISC BRAKE | ||
| Rear | REAR DISC BRAKE | ||
| Torque | See Torque Specifications in Text or applicable graphics under COMPONENTS WITH TORQUE SPECIFICATIONS | ||
| Charging | |||
| Generator | GENERATOR | ||
| Torque | See Torque Specifications in Text and applicable graphics under COMPONENTS WITH TORQUE SPECIFICATIONS | ||
| Drive Belts | |||
| Belt Routing & Adjustment | INSTALLATION | ||
| Engine Cooling | |||
| General Service Specifications | SPECIFICATION | ||
| Radiator Cap Pressure | 14-18 psi (.95-1.25 kg/cm2 ) | ||
| Thermostat R & I | THERMOSTAT | ||
| Water Pump R & I | WATER PUMP | ||
| Engine Mechanical | |||
| Compression Test Procedure | COMPRESSION | ||
| Oil Pressure Test Procedure | ENGINE OIL PRESSURE | ||
| Overhaul | SPECIFICATION | ||
| Torque | See Torque Specifications in Text or applicable graphics under COMPONENTS WITH TORQUE SPECIFICATIONS | ||
| Fluid Specifications | See FLUIDS under MAINTENANCE tab. From within Manager or Service Writer, click the "30/60/90 Interval" or "Maint." button. | ||
| CVT Flex Plate (Drive Plate) Torque | 1st step: 22.1 Ft. lb. (30 N.m) 2nd step: 30°-35° |
||
| M/T Flywheel Torque | 1st step: 22.1 Ft. lb. (30 N.m) 2nd step: 30°-35° |
||
| Fuel System | |||
| Fuel Pressure Test Procedure | FUEL PRESSURE | ||
| Fuel Filter Location | Attached to fuel pump unit. | ||
| Fuel Filter R & I | FUEL FILTER | ||
| Ignition | |||
| Firing Order & Cylinder Identification | FIRING ORDER & CYLINDER IDENTIFICATION | ||
| Ignition Wires (Resistance) | Engine has coil-on-plug ignition. | ||
| Ignition Wires (Routing) | Engine has coil-on-plug ignition. | ||
| Spark Plug | NGK: SILKFR8A6 / Gap: 0.5 - 0.6 mm (0.020 - 0.024 in.) / Tightening Torque: 17.5 N.m (12.9 ft-lb) | ||
| Starting | |||
| Starter | STARTER | ||
| Torque | 36.9 Ft. lb. (50 N.m) | ||
| Wheel Alignment | |||
| Adjustment Specifications | |||
| Front | WHEEL ALIGNMENT | ||
| Rear | WHEEL ALIGNMENT | ||
| Torque | |||
| Front | COMPONENTS WITH TORQUE SPECIFICATIONS | ||
| Rear | COMPONENTS WITH TORQUE SPECIFICATIONS | ||
| Wheel & Tire | |||
| Wheel Lug Nut Torque | 88.5 Ft. lb. (120 N.m) | ||