LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2023 >> WRX Base, Standard Trans >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Suspension Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Suspension Control Module: Installation

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Install the damper control module.
    1. Install the damper control module to the bracket damper control module.
    2. Connect the connector to the damper control module.
    3. Install the bracket damper control module.

      Tightening torque: 

      7.5 N.m (0.8 kgf-m, 5.5 ft-lb)

  2. Install the front seat LH. Ref. to SEATS>FRONT SEAT>INSTALLATION .
  3. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
scientia non olet · About LEMON Manuals