Execution Condition

Secondary parameters	Execution condition
Phase 1 12 V battery system voltage	10 V or more
Engine speed	At or more than rpm values in TABLE 1
Phase 2 Fail detected (P1867)	TRUE
12 V battery system voltage	10 V or more
Ignition state	OFF
Measured primary pulley shaft speed	400 rpm or less
Transmission fluid temperature	10 degC or more

TARGET LINE PRESSURE SPECIFICATION

		Target line pressure (kPa)
		0	500	1000	1500	2000	3000	4000	5000	6000
Transmission fluid temperature (degC)	-40	500	500	500	500	529	636	791	961	8000
	-20	500	500	500	500	529	636	791	961	8000
	0	500	500	500	500	529	636	791	961	8000
	20	500	500	500	500	529	636	791	961	8000
	40	500	500	500	500	529	636	791	961	8000
	60	500	500	506	561	631	807	1154	8000	8000
	80	500	500	590	705	818	991	1300	4658	8000
	100	500	569	670	795	901	1174	1458	4962	8000
	120	500	653	782	897	1060	1352	1707	8000	8000