Diagnostic Method
If the duration of time while the following conditions are met is longer than the time indicated, judge as NG.
JUDGMENT VALUE SPECIFICATION
| Malfunction Criteria | Threshold Value | ||
|---|---|---|---|
| ABS(1) (Engine speed - Measured primary pulley shaft speed x Primary reduction gear ratio) | Exceeds rpm values in TABLE 2 | ||
|
|||
ENGINE SPEED SPECIFICATION
| Engine speed (rpm) | 0 | 500 | 1000 | 1500 | 2000 | 2500 | 3000 | 3500 |
| ABS (Engine speed - Measured primary pulley shaft speed x Primary reduction gear ratio) (rpm) | 200 | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
ENGINE SPEED SPECIFICATION
| Engine speed (rpm) | 4000 | 4500 | 5000 | 5500 | 6000 | 6500 | 7000 |
| ABS (Engine speed - Measured primary pulley shaft speed x Primary reduction gear ratio) (rpm) | 200 | 200 | 200 | 200 | 200 | 200 | 200 |
Time needed for diagnosis: 10 s
Malfunction indicator light illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.