October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Throttle Body: Removal
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
.
- Drain engine coolant. Ref. to COOLING (H4DO)>ENGINE COOLANT>REPLACEMENT>DRAINING OF ENGINE COOLANT
.
- Perform the steps below to remove the air intake boot, and place it aside so that it does not interfere with the work.
CAUTION:
Do not disconnect the PCV hose No. 2 (a).
- Remove the air cleaner case. Ref. to INTAKE (INDUCTION) (H4DO)>AIR CLEANER CASE>REMOVAL
.
- Loosen the clamp, remove the air intake boot, and place it aside so that it does not interfere with the work.
CAUTION:
Be careful not to pull out the PCV hose No. 2 (a).
 Courtesy of SUBARU OF AMERICA, INC.
|
- Disconnect the connector (A) and preheater hose (B).
- Remove the throttle body.
 Courtesy of SUBARU OF AMERICA, INC.
|