October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Crankshaft Position Sensor: Removal
- Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY
.
- Disconnect the connector (A) and remove the transmission harness (B) from the ATF cooler pipe. (AT model)
- Remove the bolt securing the preheater pipe.
 Courtesy of SUBARU OF AMERICA, INC.
|
- Disconnect the connector (A) and remove the crankshaft position sensor.
CAUTION:
To prevent the preheater hose from being damaged or loose, pay careful attention while moving the preheater pipe.
 Courtesy of SUBARU OF AMERICA, INC.
|