Select Lever: Disassembly

NOTE: The "P range" switch and the manual mode switch are integrated with the guide plate.

Pull out the shift lock solenoid terminal using a flat tip screwdriver, etc.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Wiring color
4	Blue
5	Black

Pull out the manual mode switch terminal using a flat tip screwdriver, etc.

Courtesy of SUBARU OF AMERICA, INC.

Terminal No.	Wiring color
10	White
11	Black

Remove the clamp push nut and then remove the shaft guide pin.

Courtesy of SUBARU OF AMERICA, INC.

(A) Clamp push nut

(B) Shaft guide pin
Remove the guide plate.
NOTE: Release the claw (a).

Courtesy of SUBARU OF AMERICA, INC.
Remove the pin, and then remove the lock plate and the shift lock solenoid as a unit.

Courtesy of SUBARU OF AMERICA, INC.
Remove the lock plate from the shift lock solenoid.

Courtesy of SUBARU OF AMERICA, INC.

Remove the clamp, spring, rod, cushion, and bushing.

Courtesy of SUBARU OF AMERICA, INC.

Remove the spacer and gasket.

Courtesy of SUBARU OF AMERICA, INC.
Remove the grommet.

Courtesy of SUBARU OF AMERICA, INC.
Use a pin punch and a hammer to remove the spring pin.

Courtesy of SUBARU OF AMERICA, INC.
Remove the arm.

Courtesy of SUBARU OF AMERICA, INC.
Remove the arm bracket and lever as a unit.

Courtesy of SUBARU OF AMERICA, INC.
Remove the arm bracket.

Courtesy of SUBARU OF AMERICA, INC.
Remove the rod and spring.

Courtesy of SUBARU OF AMERICA, INC.

(A) Rod

(B) Spring
Remove the snap pin, washers, spacer, bushing, and swivel from the arm.

Courtesy of SUBARU OF AMERICA, INC.