LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> BRZ tS >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel Injection System >> Fuel Pressure Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pressure Sensor: Removal

CAUTION:
  • Be careful not to spill fuel.
  • Catch the fuel from the pipes using a container or cloth.
  1. Disconnect the ground terminal from battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Perform the steps below to remove the air intake boot, and place it aside so that it does not interfere with the work.
    CAUTION: Do not disconnect the PCV hose No. 2 (a).
    1. Remove the air cleaner case. Ref. to INTAKE (INDUCTION) (H4DO)>AIR CLEANER CASE>REMOVAL .
    2. Loosen the clamp, remove the air intake boot, and place it aside so that it does not interfere with the work.
      CAUTION: Be careful not to pull out the PCV hose No. 2 (a).
    G16523197Courtesy of SUBARU OF AMERICA, INC.
  3. Remove the fuel injector (cylinder direct injection side) RH. Ref. to FUEL INJECTION (FUEL SYSTEMS) (H4DO)>FUEL INJECTOR>REMOVAL>CYLINDER DIRECT INJECTION SIDE>RH .
    NOTE: When replacing the fuel pressure sensor or fuel injector pipe RH, it is not necessary to remove the fuel pressure sensor from the fuel injector pipe RH as both parts are replaced with new parts.
scientia non olet · About LEMON Manuals