LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Forester Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Anti-Theft System - Security And Locks >> Keyless Entry Control Module >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Keyless Entry Control Module: Installation

CAUTION: Before handling the airbag system components, refer to "CAUTION" of "General Description" in "AIRBAG SYSTEM". Ref. to AIRBAG SYSTEM>GENERAL DESCRIPTION>CAUTION .
  1. Install the keyless entry control module.

    Tightening torque: 

    13 N.m (1.3 kgf-9.6 ft-lb)

  2. Install the trim panel assembly D pillar LH and the trim panel assembly apron LH. Ref. to EXTERIOR/INTERIOR TRIM>REAR QUARTER TRIM>INSTALLATION .
  3. Install the rear seat cushion assembly. Ref. to SEATS>REAR SEAT>INSTALLATION .
  4. Connect the ground terminal to battery sensor. Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  5. When the keyless entry control module is replaced, register the transmitter ID. (Model with TPMS) Ref. to WHEEL AND TIRE SYSTEM>TIRE PRESSURE MONITORING SYSTEM>OPERATION .
scientia non olet · About LEMON Manuals