LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Forester Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Detection/Rear Cross Traffic Alert System (Diagnostics) >> Control Module I/O Signal >> Electrical Specification >> Radar Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Radar Sensor

G11256951Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Contents Measuring condition Standard
Radar sensor LH (master) Radar sensor RH (slave)
(R25) or (R61) No. 1 ←→ Chassis ground Private CAN H Private CAN H Always 1 MΩ or more
(R25) or (R61) No. 2 ←→ Chassis ground: Master CAN H - Always 1 MΩ or more
(R25) or (R61) No. 3 ←→ Chassis ground - - - -
(R25) or (R61) No. 4 ←→ Chassis ground Left mirror LED output Right mirror LED output
  • Ignition switch OFF → ON
  • BSD/RCTA OFF switch OFF → ON
  • When indicator is ON: 2.5 - 10.5 V
  • When indicator is blinking: 0 ←→ 2.5 - 10.5 V
  • When indicator is OFF: Less than 1 V
(R25) or (R61) No. 5 ←→ Chassis ground Ignition power supply Ignition power supply Ignition switch OFF → ON Less than 1 V → 9 - 16 V
(R25) or (R61) No. 6 ←→ Chassis ground Private CAN L Private CAN L Always 1 MΩ or more
(R25) or (R61) No. 7 ←→ Chassis ground Master CAN L - Always 1 MΩ or more
(R25) or (R61) No. 8 ←→ Chassis ground BSD/RCTA OFF switch -
  • Ignition switch ON
  • BSD/RCTA OFF switch OFF → ON (while pressing and holding the switch)
 Less than 1 V → 9 - 16 V
(R25) or (R61) No. 9 ←→ Chassis ground - - - -
(R25) or (R61) No. 10 ←→ Chassis ground GND GND Always Less than 1 Ω
scientia non olet · About LEMON Manuals