April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC C0563: Abs Control Module Performance: Notes

DTC detecting condition:

Immediately at fault recognition

CAUTION: After servicing or replacing faulty parts, perform the last step of the basic diagnostic procedure. Ref. to TRANSMISSION (DIAGNOSTICS)>BASIC DIAGNOSTIC PROCEDURE .

BASIC INSPECTION .
Perform basic inspection. Ref. to TRANSMISSION (DIAGNOSTICS)>GENERAL DESCRIPTION>INSPECTION .
NOTE:
- Check the battery and its installation condition.
- Check the related fuse. (When the replaced fuse is blown immediately, check for short circuits.)
- Visually check that the related connectors are properly connected. Also, check the related ground terminal for looseness and corrosion.
Is the check result OK?

Yes: Go to 2.

No: Repair the defective part.
CHECK DTC .
Read the DTC of [Transmission] using the Subaru Select Monitor. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

Is DTC U0122 or U0416 displayed?

Yes: Perform the diagnosis according to the DTC. Ref. to TRANSMISSION (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .

No: Read the DTC of [Brake Control] using the Subaru Select Monitor. Ref. to BRAKE CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC) .

Perform the diagnosis according to the DTC. Ref. to BRAKE CONTROL (DIAGNOSTICS)>DIAGNOSTIC TROUBLE CODE (DTC)>LIST .