LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2024 >> Legacy Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment >> Front Suspension System And Wheel Alignment >> Stabilizer >> Removal >> Stabilizer Bushing
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Stabilizer Bushing

  1. Disconnect the ground terminal from battery sensor. (H4DO model) Ref. to REPAIR CONTENTS>NOTE>BATTERY .
  2. Lift up the vehicle.
  3. Remove the under cover front. Ref. to EXTERIOR/INTERIOR TRIM>FRONT UNDER COVER>REMOVAL .
  4. Remove the front exhaust pipe. (H4DO model) Ref. to EXHAUST (H4DO)>FRONT EXHAUST PIPE>REMOVAL .
  5. Remove the center exhaust pipe (rear). (H4DOTC model) Ref. to EXHAUST (H4DOTC)>CENTER EXHAUST PIPE>REMOVAL>CENTER EXHAUST PIPE (REAR) .
  6. Remove the bolt and nut, and remove the clamp stabilizer.
    NOTE: The left and right clamp stabilizers differ in shape.
    G14384638Courtesy of SUBARU OF AMERICA, INC.
  7. Remove the rubber bushing stabilizer front.
scientia non olet · About LEMON Manuals