LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2025 >> Outback Limited XT >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Blind Spot Detection/Rear Cross Traffic Alert System (Diagnostics) >> Control Module I/O Signal >> Electrical Specification >> Radar Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Radar Sensor

G13627579Courtesy of SUBARU OF AMERICA, INC.
Terminal No. Contents Measuring condition Standard
Radar sensor LH (master) Radar sensor RH (slave)
(L107) or (R104) No. 1 ←→ Chassis ground BSD/RCTA local CAN (High) BSD/RCTA local CAN (High) Always 1 MΩ or more
(L107) or (R104) No. 2 ←→ Chassis ground (H)_Advanced safety CAN H - Always 1 MΩ or more
(L107) or (R104) No. 3 - - - -
(L107) or (R104) No. 4 ←→ Chassis ground Left mirror LED output Right mirror LED output
  • Ignition switch OFF → ON
  • BSD/RCTA OFF button OFF → ON (while touching the button)
  • When indicator is ON: 2.5 - 10.5 V
  • When indicator is blinking: 0 ←→ 2.5 - 10.5 V
  • When indicator is OFF: Less than 1 V
(L107) or (R104) No. 5 ←→ Chassis ground Ignition power supply Ignition power supply Ignition switch OFF → ON Less than 1 V → 9 - 16 V
(L107) or (R104) No. 6 ←→ Chassis ground BSD/RCTA local CAN (Low) BSD/RCTA local CAN (Low) Always 1 MΩ or more
(L107) or (R104) No. 7 ←→ Chassis ground (H)_Advanced safety CAN L - Always 1 MΩ or more
(L107) or (R104) No. 8 - - - -
(L107) or (R104) No. 9 - - - -
(L107) or (R104) No. 10 ←→ Chassis ground GND GND Always Less than 1 Ω